Backwards Long Jump: Difference between revisions

From Ukikipedia
Jump to navigation Jump to search
(BLJ is also not in 3D All Stars)
No edit summary
 
(6 intermediate revisions by 2 users not shown)
Line 1: Line 1:
The '''Backwards Long Jump''', or '''BLJ''' for short, is one of the most well-known and versatile methods of gaining [[Hyperspeed]], whereby Mario's backwards speed can increase under certain conditions during a backwards-facing [[Long Jump]].  
The '''Backwards [[Long Jump]]''' hyperspeed method, or '''BLJ''' for short, is the most famous [[hyperspeed]] method in Super Mario 64. Due to their versatility, BLJs are commonly used in all kinds of [[Speedrun|speedruns]] and [[Challenge|challenges]].


This [[Glitch|glitch]] is caused by the lack of a negative limit on Mario's speed. The first frame of a Long Jump multiplies Mario's forward velocity by 1.5, and although the game keeps this velocity below 48.0, no corresponding negative cap is enforced. Since Mario's speed is slowed due to drag each frame he is in the air, this multiplier does not affect typical gameplay. However, if Mario is in a position where he can perform many backwards-facing Long Jumps in rapid succession, he can repeatedly reduce his speed while overcoming drag, resulting in negative Hyperspeed.  
When Mario initiates a long jump, his horizontal speed is multiplied by 3/2. A BLJ occurs when a backwards long jump is interrupted before the effects of drag can counteract the speed gain from the 3/2 multiplier. This does not occur with forwards long jumps because long jumps have a "hard cap" of +48 horizontal speed which Mario's speed cannot exceed. No such cap exists in the negative direction because normally the "soft cap" of -16 speed from drag is easily enough to stop any speed gain.


BLJs can be performed on [[List of Major BLJ Locations|many slopes, stairways, and obstacles]], making it useful for [[Speedrun|speedruns]] and [[Challenge|challenges]] alike.
There are several different types of BLJs. The distinguishing feature of different types of BLJs is what they use to interrupt the long jump:
* Slope BLJs use slopes by going up the slope.
* Stair BLJs use stairs by going up the stairs.
* Elevator BLJs use the upwards movement of an elevator or other object.
* [[Side BLJ|Side BLJs]] use two floors at slightly different levels by oscillating between them.
* Ceiling BLJs use an exposed ceiling or low-hanging ceiling by making Mario hit his head and start travelling downwards faster.


Among other glitches, BLJs were fixed in the [[Super Mario 64#Shindou|Shindou]] version. This also means that they do not work on any Japanese [[Virtual Console]] releases, 3D All Stars, nor the [[Super Mario 64 (iQue)|iQue]].
BLJs can also be [[Pause Buffering|pause buffered]] to increase the amount of long jumps that can be performed in a given amount of time or space.


== Execution ==
The BLJ glitch was patched in the [[Super Mario 64#Shindou|Shindou release]], and therefore also the [[Super Mario 64#iQue (Chinese)|iQue version]]. This also means that any emulator releases of these game versions lack the BLJ glitch, namely the [[Super Mario 64#Japanese 2|Japanese Wii VC release]], the [[Super Mario 64#Japanese 3|Japanese Wii U VC release]], and all versions of [[Super Mario 64#Super Mario 3D All-Stars|Super Mario 3D All-Stars]].
{{rewrite}}
To perform a BLJ, do a long jump with Mario facing away from the obstacle/stairway/slope but move backwards towards it (by holding the joystick in the opposite direction). Mario will collide with the obstacle/stairway/slope, leaving him on the ground and enabling him to backwards long jump again. Mario's speed becomes negative at this point, and BLJing repeatedly causes a negative speed increase of approximately 45-50% of Mario's currently stored speed at that time. Once the desired speed is reached, simply stop BLJing and Mario will zoom off backwards at an incredibly high speed. If you continue BLJing long enough, Mario's speed, stored in a float, will eventually reach -229399772256808620000000000000000000000, then tick over to -1.#INF, and [[crash]] the game on console.


The key aspect of BLJs is Mario's capability of retaining negative speed temporarily. Eventually, the speed will increase back to 0; however, there are a few frames within a BLJ in which his speed doesn't deplete instantly. These frames allow for repeated BLJs, thus increasing his speed.
==Slope BLJ==


You can use BLJs to:
A slope BLJ is performed by interrupting a backwards long jump using a rising slope. Because Mario usually lands immediately after long jumping (assuming a steep enough slope), slope BLJs are normally pause bufferable.


* Gain enough speed to pass through doors, such as:
==Stair BLJ==
*: Star doors
*: Doors that trigger a loading zone (though the area will not load)
* Zip backwards on the ground at very high speeds (if obstacles are avoided)
* Jump over incredibly large gaps (since when over the air, Mario will have the same BLJ jumping physics but with the massive speed still present)
* Pass through some loading zones, like the water wall needed to enter Dire Dire Docks
* Pass through some types of walls (like the iron gates in Bob-omb Battlefield.)
* Go into [[Parallel Universe]]s
* Perform a [[negative jump]] with large amount of speed


=== Pause-buffered BLJ ===
A stair BLJ is similar to a slope BLJ, except using stairs instead of slopes to achieve the rising floor effect. Stair BLJs often cannot be performed when there are wall hitboxes sticking out from the stairs because the walls prevent Mario from landing on the higher floor. Similarly to slope BLJs, stair BLJs are often pause bufferable.
{{see also|Pause Buffering#Pause Buffering Inputs}}


Pause BLJing allows Mario to BLJ 30 times per in-game-second instead of 15 (SM64 runs at 30 frames-per-second). While BLJing, do the following sequence:
Stair BLJs are often used for bypassing doors in the castle.


    First Frame: (Start) + (Z) + (A)
==Elevator BLJ==
    Second Frame:
    Third Frame: (Start)
    Fourth Frame:
    Fifth Frame: (Start) + (Z) + (A)
    And so on!


Basically, the Start Menu acts like a frame buffer which allows more inputs to be performed within the game timer. These rules apply for BLJing as well. However, this only works on slopes, stairs, and elevators. It does not work with Side BLJs or (some) Low Ceiling BLJs.
Elevator BLJs are also conceptually similar to slope BLJs and stair BLJs in that they too use the floor under Mario rising to interrupt Mario's long jump. Elevator BLJs use elevators as the rising floor. Elevator BLJs are a common solution for when one wishes to quickly get a lot of speed since while slope BLJs and stair BLJs can only last until the slope or stair runs out or Mario hits out-of-bounds, elevator BLJs can last as long as the elevator is moving and don't need to stop when Mario hits out-of-bounds. Because of this, elevator BLJs are the only type of BLJ that can reach [[PU]] speed.


== Types of BLJs ==
==Side BLJ==


While all BLJs work by the same principle, there are many different methods of performing them. There are numerous places where a BLJ can be performed throughout the game (virtually every level contains at least one), and it is unlikely that all such locations have been discovered.
Side BLJs or SBLJs are the most complex type of BLJ. A side BLJ is performed by oscillating between two floors at slightly different heights to achieve an effect similar to a stair BLJ but without needing a long, wall-less staircase. Side BLJs are performed by first having Mario face slightly to the higher floor (so that when Mario's moving backwards, he moves down to the lower floor), then straining to the higher floor during the long jump so that Mario snaps up to it. After long jumping from the lower floor, Mario ends up on the higher floor due to the straining, but because of the direction Mario is facing he snaps down to the lower floor on the next frame. This can then be repeated.


=== Stair BLJ ===
Because side BLJs require 1 extra frame per long jump for Mario to snap back down to the lower floor, they cannot be pause buffered.
Stair BLJs were the first kind of BLJs to be discovered. A Stair BLJ consists of long jumping backwards onto stairs, which are basically tiny floors, which Mario can run directly over. BLJing on stairs works similar to Elevator BLJs because they both consist of Mario's jumps being interrupted allowing for more jumps to be performed, however the timing must be precise.


Here's how they work: With a precisely timed BLJ, Mario's vertical position snaps to the next highest stair, ultimately reducing Mario's vertical speed to 0 (allowing him to repeatedly BLJ on the ground). When this occurs, his negative horizontal speed is temporarily stored, allowing him to repeat the process which results in a greater amount of negative speed.
==Ceiling BLJ==


=== Slope BLJ ===
A ceiling BLJ is performed by having Mario hit a ceiling during his long jumps so that Mario starts moving downwards earlier, meaning there's less time for drag to slow Mario down. Ceiling BLJs can be performed with low ceilings or with [[Exposed ceiling|exposed ceilings]]. [[Lobby Backwards Long Jump]] is an example of this type of BLJ.
Slope BLJs are backwards long jumps on steep slopes. To find slopes with this property, locate slopes that permit Mario to stand perfectly still on them. He will not slide off of them.
 
Here's how it works: When BLJing on a steep slope, Mario's jump is interrupted by the steep ground. With no negative horizontal velocity, Mario's long jumps behave just as the developers intended. However, on steeper slopes, with a negative horizontal velocity, and with ground located behind Mario, the game has no choice but to force Mario's position backwards along with an increased vertical position. This process is repeatable, allowing for Slope BLJs to be performed.
 
A common slope to BLJ on would be the slopes on the Castle Roof or the tan-colored slopes located by the cannon in the castle grounds.
 
=== Elevator BLJ ===
Elevator BLJs are performed on elevators, but not every elevator permits an elevator BLJ!
 
Here's how they work: BLJs are possible on rising elevators because an elevator's vertical velocity allows them to catch up to Mario as soon as he leaves the ground from a BLJ. This interrupts the first jump and allows him to jump again, thus repeating the process of a BLJ.
 
The elevators in Hazy Maze Cave, Big Boo's Haunt and Bob-omb Battlefield are good places to practice. Elevators that move in a horizontal fashion, such as the ones located in the volcano of Lethal Lava Land, do not have the properties to initiate Elevator BLJs because they do not have enough vertical velocity.
 
=== Low Ceiling BLJ ===
These are probably the trickiest locations to find because some of them are invisible or are just plain easy to overlook. However, walls above a floor can also act like ceilings. These walls don't necessarily have to be parallel with the ground in order for a Low Ceiling BLJ to be performed. <!--???-->
 
These types of BLJs demonstrate Mario's mechanics to their most basic properties. Mario has the capability of temporarily storing negative speed after a BLJ, and this speed can be increased with repeated BLJs.
 
The most common Low Ceiling BLJ is the one presented in the video (located in the Jolly Roger Bay room). Both of the Lobby BLJs in the main room of the castle are also Low Ceiling BLJs, but they utilize Invisible Wall Hitboxes which act as Low Ceilings.
 
=== Side BLJ ===
{{main|SBLJ}}
 
Side BLJs are very similar to stair BLJs, since both utilize the vertical position snapping mechanic in the game (mentioned earlier in Stair BLJs). A Side BLJ essentially consists of Mario repeatedly BLJing onto and off of a floor.
 
Here's how it works: When Mario BLJs parallel to the stairs and strains sideways, Mario's vertical position snaps to the next highest stair (when the right angle is utilized). This also requires Mario's facing angle to be slightly askew with respect to the stairs, so that when he BLJs onto the next highest stair, his facing angle & negative speed allow him to drop back down to the original stair with which the Side BLJ was initiated with, since Mario cannot move sideways during landing animation. As mentioned earlier, when Mario BLJs and snaps onto the next highest stair, his negative speed is temporarily stored, allowing him to repeat the process which results in a greater amount of negative speed.
 
Side BLJs can be performed on most stairs (due to some stairs having the appearance of stairs but are actually steep slopes) and on flat platforms which Mario can run directly over.


[[Category:Glitches]]
[[Category:Glitches]]

Latest revision as of 21:35, 14 October 2024

The Backwards Long Jump hyperspeed method, or BLJ for short, is the most famous hyperspeed method in Super Mario 64. Due to their versatility, BLJs are commonly used in all kinds of speedruns and challenges.

When Mario initiates a long jump, his horizontal speed is multiplied by 3/2. A BLJ occurs when a backwards long jump is interrupted before the effects of drag can counteract the speed gain from the 3/2 multiplier. This does not occur with forwards long jumps because long jumps have a "hard cap" of +48 horizontal speed which Mario's speed cannot exceed. No such cap exists in the negative direction because normally the "soft cap" of -16 speed from drag is easily enough to stop any speed gain.

There are several different types of BLJs. The distinguishing feature of different types of BLJs is what they use to interrupt the long jump:

  • Slope BLJs use slopes by going up the slope.
  • Stair BLJs use stairs by going up the stairs.
  • Elevator BLJs use the upwards movement of an elevator or other object.
  • Side BLJs use two floors at slightly different levels by oscillating between them.
  • Ceiling BLJs use an exposed ceiling or low-hanging ceiling by making Mario hit his head and start travelling downwards faster.

BLJs can also be pause buffered to increase the amount of long jumps that can be performed in a given amount of time or space.

The BLJ glitch was patched in the Shindou release, and therefore also the iQue version. This also means that any emulator releases of these game versions lack the BLJ glitch, namely the Japanese Wii VC release, the Japanese Wii U VC release, and all versions of Super Mario 3D All-Stars.

Slope BLJ

A slope BLJ is performed by interrupting a backwards long jump using a rising slope. Because Mario usually lands immediately after long jumping (assuming a steep enough slope), slope BLJs are normally pause bufferable.

Stair BLJ

A stair BLJ is similar to a slope BLJ, except using stairs instead of slopes to achieve the rising floor effect. Stair BLJs often cannot be performed when there are wall hitboxes sticking out from the stairs because the walls prevent Mario from landing on the higher floor. Similarly to slope BLJs, stair BLJs are often pause bufferable.

Stair BLJs are often used for bypassing doors in the castle.

Elevator BLJ

Elevator BLJs are also conceptually similar to slope BLJs and stair BLJs in that they too use the floor under Mario rising to interrupt Mario's long jump. Elevator BLJs use elevators as the rising floor. Elevator BLJs are a common solution for when one wishes to quickly get a lot of speed since while slope BLJs and stair BLJs can only last until the slope or stair runs out or Mario hits out-of-bounds, elevator BLJs can last as long as the elevator is moving and don't need to stop when Mario hits out-of-bounds. Because of this, elevator BLJs are the only type of BLJ that can reach PU speed.

Side BLJ

Side BLJs or SBLJs are the most complex type of BLJ. A side BLJ is performed by oscillating between two floors at slightly different heights to achieve an effect similar to a stair BLJ but without needing a long, wall-less staircase. Side BLJs are performed by first having Mario face slightly to the higher floor (so that when Mario's moving backwards, he moves down to the lower floor), then straining to the higher floor during the long jump so that Mario snaps up to it. After long jumping from the lower floor, Mario ends up on the higher floor due to the straining, but because of the direction Mario is facing he snaps down to the lower floor on the next frame. This can then be repeated.

Because side BLJs require 1 extra frame per long jump for Mario to snap back down to the lower floor, they cannot be pause buffered.

Ceiling BLJ

A ceiling BLJ is performed by having Mario hit a ceiling during his long jumps so that Mario starts moving downwards earlier, meaning there's less time for drag to slow Mario down. Ceiling BLJs can be performed with low ceilings or with exposed ceilings. Lobby Backwards Long Jump is an example of this type of BLJ.

v • d • e
Glitches
Hyperspeed
Action-based
Freefall-based
Object-based
Faux Hyperspeed
Other Glitches
Speed Manipulation
Action Bugs
Object Interaction Bugs
Object Bugs
Quarter Frame Transitions
Engine Bugs
Audio Bugs
System Bugs
Level Geometry Bugs
Other Pages
Retrieved from "https://ukikipedia.net/mediawiki/index.php?title=Backwards_Long_Jump&oldid=19428"